Welding Powder (SAW) Flux Sj101g, Esab Ok Flux 10.71

• Customization: Available
• state: Solid
• pH: Alkaline
• Model NO.: ok flux 10.71/sj101g
• Type: Inorganic
• Melting Point: >600℃
• Chemical Composition: Sio2+TiO2=18-25 Cao+MGO=28-35
• Function: Protect Weld Metal, Using for Submerged Arc Welding Wire(Saw)
• Application: Submerged-arc Welding
• Manufacturing Method: Sintering
• Aws Specification: Aws A5.17 F7a2-Em12k F7A4-Eh14
• Equivalent to: Esab Ok 10.71
• En Specification: En760 SA Fb 1 55 AC H5
• Certification: CCS, ABS, BV, Lr
• Quality System: ISO9001:2008
• Performance: Easy to Slag, Smooth Welding Bead
• Can Be Applied with: EL12, Em12k, Eh14 Welding Wire
• Grain Size: 1.7mm~0.3mm
• Sample: Free Sample Can Offered
• Key Word: Welding Powder, Welding Flux
• Transport Package: 25kg Kraft Bag with Plastic Lining Inside
• Specification: 25kg/bag, 40bags/plywood pallet
• Trademark: PANDING/OEM
• Origin: Laiwu, Shandong Pr. China
• HS Code: 38109000
• Production Capacity: 10000 Tons Agglomerated Flux, 8000 Tons Fused Flux

Product Description

Technical data sheet 

Esab OK 10.71  Submerged Arc Welding Flux  SJ101G

Specifications: 
AWS A5.17/5.23  F7A2-EM12K  F7A4-EH14  F7A6-EG-G  F8A4-EA4-A4 
EN760 SA FB 1 55 AC H5  

Description:
SJ101G is an agglomerated fluoride-basic type flux. Basicity: 2.0 (B//W) It is gray and round grain,mesh:10-45(2.0-0.4mm). It can highly satisfy the steel welding requirements for oil gas pipeline. Either AC. or DC.can be used, the wire shall be connected to positive pole when applying DC. It has steady arc and the welding bead smooth and pleasing , rice weld formation, and easy in slag removing as well with perfect deposit metal welding technological characteristics. It has higher low-temperature impact toughness and high crack resistance.

It should be re-dried under 300-350ºC for 2 hours. Rust,grease and moisture on the weldment should be removed before welding.

Usage: 
Matching with suitable welding wires (H08C,H08MnA,H10Mn2,H08MnMoA,H08Mn2MoA),it can weld many kinds of steel pipes,such as X52,X60,X65,X70,X80,etc.It also can be used in 16Mn,Q345C etc structural steel submerged arc welding.

Chemical Composition(%)

SiO2+TiO2	Al2O3+MnO	Ca O+MgO	CaF2	S	P
15-25	23-30	25-35	15-25	≤0.03	≤0.04

 
Mechanical Performance of the Deposited Metal

WIRE	Yield Point Rel(MPa)	Tensile Strength Rm(MPa)	Elongation A (%)	Charpy V Notch Impact Strength KV2(J)
				-20ºC	-40ºC	-50ºC
EM12K	≥400	490~660	≥22	≥60
EH14	≥400	480~660	≥22	≥70	≥60	≥29
EG	≥460	530~690	≥22	≥90	≥80	≥42
EA4	≥500	580~700	≥22	≥65	≥60	≥38

 Attention:
1. We get values in data sheets from tests carried out in accordance to AWS and GB standard procedure. They only represent values we get under those conditions. They are not to be taken as guarantees. AS to welding ,individual test results may depending on experience & technique, flux type, base metal, joint preparation, flux preparation, ampere, voltage, etc.
2. If welding fluxes are stored in improper environment or influenced by condensed moisture, anyway, they get damp, please dry them at 300-350 for 2 hours before usage.
3. Please clean the rust,oil,water on base metal before welding.
4. Add minimum 20% new flux when using recovered flux to avoid welding defects and maintain welding performance & mechanical properties.
5. Please control parameters properly, like preheat temperature, interpass temperature,cooling rate.

Products Picture:
Company Brief Introduction
(1)Company Name:Shandong Hulin Welding Material Co.,Ltd
(2)Main Products:
    SAW Flux&Wire, MIG Wire, FCW wire.
(3)Best Selling Product Models:
    SAW Flux:SJ101,SJ101G,SJ102,SJ301,SJ501,HJ107,HJ260,HJ431
    SAW Wire: EM12K,EL8,EL12
    MIG Wire: ER70S-6
    FCW Wire: E71T-1 
(5)Quality System:ISO9001:2000
(6)Year Established:1999
(7)Brand Name:Panding Brand
(8)Application: Steel Pipe, Structural steel, LPG Cylinder, Pressure vessel, Boiler, Bridges etc.
Packing & Shipping Details:
(1)Bag:25 KGS/Kraft Bag With Plastic Lining Inside
(2)Pallet:40 Bags(1 Ton)/Plywood Pallet
(3)Container:20-24 Tons/Container
(4)OEM & buyer label is ok, and technical support can be offered



FAQ:
Q. 1 Can you provide free sample?
A:  Total free sample(including freight cost) can be offered
Q. 2  What is your delivery time?
A: Within 7 days after receiving deposit.
Q: 3 Is your price competitive with other companies?
A: Our goal is to give the best price with same quality and best quality with the same price. We do everything we can to reduce your cost.
Q. 4  How about OEM?
A: OEM IS OK.
Q. 5  Why we should choose your company?
A: Firstly, we are ORIGINAL factory. We can guarantee delivery time and provide special requirements for customers.
Secondly, we have professional foreign trade team with high efficiency communications and professional solutions.      
Thirdly, we have special team work for after sales services 24*7 to help you slove any kind of problem

Contact us: