SAW Welding Flux SJ101 & SAW Welding Wire EL8/EM12 matching together best using for structural steel fabrication
1. LH-SJ101 Technical Specification:
Specifications:
AWS A5.17/5.23 F6A0-EL8 F6A2-EM12 F7A2-EM12K F7A4-EH14
EN760 SA FB 1 65 AC H5
Description:
SJ101 is an agglomerated fluoride-basic type flux. It is gray and round grain,mesh 10-60. it can be operated with AC and DC. ,the welding electric current can up to 1200A.It has excellent weldability, the welding bead appearance is beautiful and the slag is easy to remove. The diffusible hydrogen content in deposited metal is less than 5ml/100g,so it has very good toughness at low temperature,therefore,crack resistance is extremely high. It is suitable for submerged arc twin-wire,tandom and multi-wire welding as well as for welding with the two-run technique.
Caution:
It should be re-dried under 300-350ºC for 2 hours. Rust,grease and moisture on the weldment should be removed before welding.
Applications:
It can be applied to different welding wires(such as H08MnA,H10mN2,H10MnSi,H08Mn2MoA,H08Mn2SiA etc.) It is fit for welding of low-carbon steel and low alloy steel. Such as oil storage tanks,pipeline steel,ships,bridges,pressure vessels,penstocks,boilers and H-beam structural steels.
Chemical Composition(%)
| SiO2+TiO2 |
Al2O3+MnO |
CaO+MgO |
CaF2 |
S |
P |
| 15-25 |
20-30 |
25-35 |
25 |
≤0.06 |
≤0.08 |
Mechanical Performance of the Deposited Metal
| WIRE |
Yield
Point
Rel(MPa) |
Tensile
Strength
Rm(MPa) |
Elongation
A
(%) |
Charpy V Notch Impact Strength KV2(J) |
| -20ºC |
-40ºC |
| EM12 |
≥400 |
465-550 |
≥22 |
≥37 |
|
| EM12K |
≥400 |
490-600 |
≥22 |
≥50 |
|
| EH14 |
≥400 |
500-650 |
≥22 |
≥70 |
≥50 |
Attention:
1. We get values in data sheets from tests carried out in accordance to AWS and GB standard procedure. They only represent values we get under those conditions. They are not to be taken as guarantees. AS to welding ,individual test results may depending on experience & technique, flux type, base metal, joint preparation, flux preparation, ampere, voltage, etc.
2. If welding fluxes are stored in improper environment or influenced by condensed moisture, anyway, they get damp, please dry them at 300-350 for 2 hours before usage.
3. Please clean the rust,oil,water on base metal before welding.
4. Add minimum 20% new flux when using recovered flux to avoid welding defects and maintain welding performance & mechanical properties.
5. Please control parameters properly, like preheat temperature, interpass temperature,cooling rate.
Packing Details:
Bag:25 KGS/Kraft Bag With Plastic Lining Inside
Pallet:40 Bags(1 Ton)/Plywood Pallet
Container:20-24 Tons/Container
OEM Packing Design Can Be Accept According To Your Requirement
2. SAW Welding wire EL8 Technical Specification:
Product introduction:
1)Carbon steel submerged arc welding wires
2)used with corresponding flux
3)gotten excellent mechanical seam
4)high efficiency,stable welding quality
5)high depositing efficiency etc.
Application:
The series of welding wires are used to welding important low carbon steel and low allow steel structure,such as boils,nuclear stations,chemical containers,ships,pressure containers etc.They have good anti-pore performance, the welding slag is easy to flake, high welding efficiency and tenacity.
Deposited metal Chemistry Composition:
| Item Code |
GB
(AWS) |
Chemical Composition of Deposited Metal |
Matching Weld Flux |
| C |
Mn |
Si |
S |
P |
Cr |
Ni |
Cu |
| XJ-H08A |
EL8 |
0.1 |
0.3/0.6 |
0.03 |
0.03 |
0.03 |
0.2 |
0.3 |
0.2 |
SJ 301, SJ501,HJ431 |
| XJ-H08MnA |
EM12 |
0.1 |
0.8/1.1 |
0.07 |
0.03 |
0.03 |
0.2 |
0.3 |
0.2 |
SJ 101,SJ127,SJ501 |
Deposited metal Machine Functions:
| TYPE |
Tensile Strength Mpa |
Yield Point % |
Elongation % |
AKV-20J |
| H08A |
320 |
427 |
29 |
44 |
Diameter and Current:
| Diameter (mm) |
2.5mm |
3.2mm |
4.0mm |
5.0mm |
| Currents (A) |
350-450 |
425-525 |
475-575 |
550-650 |
Correspondence of the welding flux
| Correspondent of the welding wire and welding flux |
6bMPa) |
60.2MPa) |
elongation(%)5 |
Akv (J) -20C |
| EL12/SJ301 |
460 |
365 |
30 |
87 |
| EL12/SJ501 |
465 |
355 |
30 |
80
|
Products Picture:
Company Brief Introduction
(1)Company Name:Shandong Hulin Welding Material Co.,Ltd
(2)Main Products:
SAW Flux&Wire, MIG Wire, FCW wire.
(3)Best Selling Product Models:
SAW Flux:SJ101,SJ101G,SJ102,SJ301,SJ501,HJ107,HJ260,HJ431
SAW Wire: EM12K,EL8,EL12
MIG Wire: ER70S-6
FCW Wire: E71T-1
(5)Quality System:ISO9001:2000
(6)Year Established:1999
(7)Brand Name:Panding Brand
(8)Application: Steel Pipe, Structural steel, LPG Cylinder, Pressure vessel, Boiler, Bridges etc.
Packing & Shipping Details:
(1)Bag:25 KGS/Kraft Bag With Plastic Lining Inside
(2)Pallet:40 Bags(1 Ton)/Plywood Pallet
(3)Container:20-24 Tons/Container
(4)OEM & buyer label is ok, and technical support can be offered
FAQ:
Q. 1 Can you provide free sample?
A: Total free sample(including freight cost) can be offered
Q. 2 What is your delivery time?
A: Within 7 days after receiving deposit.
Q: 3 Is your price competitive with other companies?
A: Our goal is to give the best price with same quality and best quality with the same price. We do everything we can to reduce your cost.
Q. 4 How about OEM?
A: OEM IS OK.
Q. 5 Why we should choose your company?
A: Firstly, we are ORIGINAL factory. We can guarantee delivery time and provide special requirements for customers.
Secondly, we have professional foreign trade team with high efficiency communications and professional solutions.
Thirdly, we have special team work for after sales services 24*7 to help you slove any kind of problem
Contact us:
MOBILE: 0086-18563406379
Audited Supplier 
Company Brief Introduction
){kind=link}
){kind=link}