| Customization: | Available |
|---|---|
| state: | Solid |
| pH: | Alkaline |
|
Still deciding? Get samples of US$ 0/Ton
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High quality aluminum welding flux SJ301 SJ101 SJ501
Mobile:+86-18563406379
Agglomerated Flux SJ101 SJ301 SJ501
Conforms to: NB/T47018.4-2011 GB/T5293-1999 F4A0-H08A F5A2-H08A F5A2-H08MnA
Equivalent to: AWS A5.17 F7A2-EL12 F7A2-EM12K F6A0-EL12
Description and application SJ501
Agglomerated acid flux for welding of ordinary carbon manganese, low alloy structure and boiler quality steel in combination with appropriate SAW wire (such as EL8,EM12. EM12K). The flux suitable for high speed welding and provides very good weld bead appearance and excellent slag removal even with narrow groove and fillet welds. The other character of LJ-SJ501 is high resistance to cracking and porosity. Especially it is insensitive to oil, rust, scale and dirt on the surface to be welded. Most being applied to double-side with single pass weld and fillet welds. As the consumption of the flux is very low,it is very economical.
• Flux type: Aluminum-Rutile
• Basicity index: 0.5-0.8
• Grain size:2.0-0.28mm(10-60meshes)
Compositions of fluxes (%)
|
SiO2+TiO2 |
Al2O3+MnO |
CaF2 |
S |
P |
|
25-35 |
50-60 |
3-10 |
≤0.06 |
≤0.08 |
Typical all weld metal mechanical property
|
Wire |
Yield Stress |
Tensile Strength |
Elongation |
AKV(J) |
|
EL12 |
≥330Mpa |
415-550Mpa |
≥22% |
≥27/0ºC |
|
EM12K |
≥400Mpa |
480-650Mpa |
≥22% |
≥27/0ºC |
Remark
1.Flux must be re-dried at 300-350ºC(572-662ºF) for 1-2 hour before welding.
2.Remove all rust, scale, paint and ect so as to obtain excellent weld metal.
3.Adding new flux regularly in order to avoiding causing welding defect and bad welding bead appearance when using flux again.
){kind=link}